結論から言って、ダメでした。
PAL版のwiiからはRGB信号出てますが、NTSC版のwiiはRGB出てません。
PAL版のwiiからはRGB信号出てますが、NTSC版のwiiはRGB出てません。
↓こんな感じで赤くなってしまいます。
↓一応配線したところ。なんと、本体のAVピンに直接ハンダ(笑)
↓参考までに。wiiのAVピンのピンアサイン
pin8とpin10をショートさせると、コンポーネントモードに。
pin8とpin10をショートさせると、コンポーネントモードに。
ピン配置は、本体側のコネクタを正面に見て
-----------\
|01 03 05 07 09 11 13 15 |
|02 04 06 08 10 12 14 16 |
-----------/
|01 03 05 07 09 11 13 15 |
|02 04 06 08 10 12 14 16 |
-----------/
Nintendo Wii Pin | Pin | Description |
Name | ||
1 | AL | Audio Left |
2 | AR | Audio Right |
3 | VC | Video (Composite) |
4 | PWR | +5v |
5 | GND | Ground |
6 | GND | Ground |
7 | Y / R / Luma | Red (PAL), Luma (NTSC), or Component Y |
8 | Mode | Mode select. If shorted with pin 10, pin 7, 9 and 11 will output Component YPbPr |
9 | PB / G / Chroma | Green (PAL), Chroma (NTSC), or Component Pb |
10 | Mode | Mode select. If shorted with pin 8, pin 7 9 and 11 will output Component YPbPr (both PAL and NTSC) |
11 | Pr / B | Blue (PAL) or Component Pr |
12 | GND | Ground |
13 | PWR | +12v |
14 | DATA | Data line 1 (Used to change the number of lines) |
15 | DATA | Data line 2 (Used to change from interlaced to progressive) |
16 | DATA | Data line 3 (Used to change from 4:3 to letterbox and 16:9) |